Two ways to distinguish the problem of your motherboard

If you have any question about your motherboard, you can use the millimeter to check, if the chip is hot, you can change another chip. The crash down of the motherboard is on the phenomenon of the failure system start, or the screen can’t show anything which is what you can’t be judged directly. For the following are methods about the repairing or distinguishing of your motherboard.

As soon as you Buy motherboard and have used it for a long time, you can use the brush to remove the dust, besides, some plug-in cards and chips which adopt the pins type will cause the pins oxidation or poor contact easily, you can use the erase to remove the surface oxide layer and plug them again.

Second way to check the problem of motherboard is to observe. Buy motherboard from motherboard shop is not an easy thing, since you have to spend a lot on it. Check the board again and again to see whether the plugs or sockets is correct or not, any connection of the circuit or inductance, burning of the surface or damage of the chip and copper foil, you should also check whether there are additional stuff fall into the components of the motherboard. It is important to buy motherboard correctly and appropriately, and it is also vital to protect it.